KINGROON 10KG PLA & PETG 3D Printer Filament, 10 Rolls — 1.75mm Mixed Colors
KINGROON 10KG PLA & PETG 3D Printer Filament, 10 Rolls — 1.75mm Mixed Colors
🧵 KINGROON 10KG PLA & PETG 3D Printer Filament, 10 Rolls – 1.75mm Mixed Colors
KINGROON 10KG filament set — 10 rolls of 1KG each in your choice of PLA or PETG, available in 22 color and material combinations. Tight ±0.02mm diameter tolerance ensures consistent extrusion across all FDM printers. Vacuum sealed with desiccant for moisture and dust protection. Ships from the United States.
Note: Colors may vary slightly between old and new packaging versions as KINGROON transitions between batches.
What Is FDM 3D Printing?
FDM (Fused Deposition Modeling) is the most common type of 3D printing. Your printer melts a plastic filament and deposits it layer by layer to build a 3D object. The filament is the “ink” — it comes on a spool, feeds into your printer’s hot end, and gets extruded through a nozzle. 1.75mm refers to the diameter of the filament strand, which is the standard size for most home and prosumer FDM printers. If your printer takes 1.75mm filament, this spool will work with it.
PLA vs PETG — Which Should You Choose?
Not sure whether to pick PLA or PETG? Here’s a quick comparison:
| Property | PLA | PETG |
|---|---|---|
| Ease of printing | Very easy — best for beginners | Easy — slightly more setup |
| Heated bed needed | No | Recommended (75–85°C) |
| Print temperature | 190–210°C | 230–250°C |
| Flexibility | Rigid | Semi-flexible, impact resistant |
| Warping | Minimal | Minimal |
| Heat resistance | Lower (softens ~60°C) | Higher (better for outdoor/functional) |
| Finish | Glossy, vibrant colors | Semi-gloss, slightly transparent |
| Best for | Display prints, prototypes, decor | Functional parts, enclosures, outdoor use |
New to 3D printing? Start with PLA — it’s forgiving and prints beautifully on most machines. Ready to print tougher functional parts? PETG is your next step up.
Compatible Printers
Standard 1.75mm filament compatible with all major FDM printers including:
- Bambu Lab — A1, A1 Mini, P1P, P1S, X1, X1C, X1E
- Creality — Ender 3 (all variants), Ender 5, CR-10 series, K1, K1 Max
- Prusa — i3 MK3S+, MK4, Mini+
- Anycubic — Kobra series, Vyper, Mega series
- Elegoo — Neptune series and FDM models
- Flashforge — Adventurer series, Creator Pro
- Artillery — Sidewinder X2, Genius Pro
- Sovol — SV06, SV07
- KINGROON — KP3S, KP5L series (native fit)
- Any FDM printer accepting 1.75mm filament with a standard spool hub!
Material Options
- PLA — 10KG in single colors (Black, White, Red, Blue, Green, Yellow, Gray) or mixed sets!
- PETG — 10KG in single colors (Black, White, Red, Blue, Green, Yellow, Gray, Silver, Transparent) or mixed sets!
PLA Print Settings
- Print temp: 190–210°C (374–410°F) | Bed temp: 25–60°C (77–140°F)
- Print speed: 40–80 mm/s | Retraction: 1mm @ 20mm/s
- No heated bed required — low warping, easy to use!
- Glossy finish with vibrant color retention!
- Glass transition temp: 61°C (142°F)
PETG Print Settings
- Print temp: 240±10°C (464±18°F) | Bed temp: 70–90°C (158–194°F)
- Print speed: 40–80 mm/s | Retraction: 1mm @ 20mm/s
- Higher temp & chemical resistance than PLA!
- Semi-flexible, impact-resistant, ideal for functional parts!
Printing Tips
- Dry at 55°C (131°F) for 8 hours if moisture is suspected!
- Store in a dry environment with desiccant after opening!
Specifications
- Brand: KINGROON | Diameter: 1.75mm (±0.02mm)
- Density: 1.17–1.24 g/cm³ | Tensile strength: 28.1±1.3 MPa
- Bending modulus: 2119±60 MPa | Bending strength: 48±1.9 MPa
- Elongation at break: 1.4±0.3%
- Filament length: ~300m per roll | Net: 1KG/roll (2.2 lb)
- Shipping weight per roll: 1.2kg (2.64 lb)
- Spool: 200mm dia × 55mm hole × 75mm height | Box: 22×22×8cm
- Total set weight: 30.86 lb (14kg)
- Shelf life: 2 years | Packaging: Vacuum sealed with desiccant
- Origin: China | Ships from: United States
