KINGROON 10KG PETG 3D Printer Filament 1.75mm — Tangle-Free, 20 Colors
KINGROON 10KG PETG 3D Printer Filament 1.75mm — Tangle-Free, 20 Colors
🧵 KINGROON 10KG PETG Filament 1.75mm – Tangle-Free, 20 Colors, Eco-Friendly
KINGROON 10KG PETG filament set — 10 rolls of 1KG each in your choice of 20 solid colors and mixed sets. Tangle-free winding with 100% zero air bubbles and tight ±0.03mm diameter tolerance for consistent, reliable extrusion. Vacuum sealed with desiccant. Ships from the United States.
Note: Colors may vary slightly between old and new packaging versions as KINGROON transitions between batches.
What Is FDM 3D Printing?
FDM (Fused Deposition Modeling) is the most common type of 3D printing. Your printer melts plastic filament and deposits it layer by layer to build a 3D object. The filament is the “ink” — it comes on a spool, feeds into your printer’s hot end, and gets extruded through a nozzle. 1.75mm refers to the diameter of the filament strand, the standard size for most home and prosumer FDM printers. If your printer takes 1.75mm filament, this spool will work with it.
PET vs PETG — What’s the Difference?
PETG is PET (the plastic used in water bottles) with Glycol added. That one change makes a big difference for 3D printing:
| Property | PET | PETG |
|---|---|---|
| Printability | Difficult — brittle, moisture-prone | Easy — forgiving and reliable |
| Flexibility | Rigid, brittle | Semi-flexible, impact resistant |
| Warping | Prone to warping | Minimal warping |
| Moisture resistance | Absorbs moisture easily | More moisture resistant |
| Transparency | Clear | Clear to slightly hazy |
| Best used for | Bottles (industrial only) | Functional parts, outdoor use, enclosures |
Bottom line: PETG is the print-ready upgrade over raw PET. It’s tougher, easier to print, and far more practical for FDM 3D printing. Raw PET filament is rarely sold — when you see PETG, that’s the right choice.
Compatible Printers
Standard 1.75mm filament compatible with all major FDM printers including:
- Bambu Lab — A1, A1 Mini, P1P, P1S, X1, X1C, X1E
- Creality — Ender 3 (all variants), Ender 5, CR-10 series, K1, K1 Max
- Prusa — i3 MK3S+, MK4, Mini+
- Anycubic — Kobra series, Vyper, Mega series
- Elegoo — Neptune series and FDM models
- Flashforge — Adventurer series, Creator Pro
- Artillery — Sidewinder X2, Genius Pro
- Sovol — SV06, SV07
- KINGROON — KP3S, KP5L series (native fit)
- Any FDM printer accepting 1.75mm filament with a standard spool hub!
PETG Highlights
- 100% zero air bubbles — smooth, consistent extrusion every print!
- Tangle-free winding — no mid-print snags or jams!
- Eco-friendly formulation — good toughness with reduced environmental impact!
- High transparency & gloss — excellent for clear or semi-transparent prints!
- Impact & acid/alkali resistant — great for functional, outdoor, or mechanical parts!
- No warping or cracking — excellent dimensional stability!
PETG Print Settings
- Print temp: 230–250°C (446–482°F)
- Bed temp: 75–85°C (167–185°F) — use adhesive if printing without heat!
- Print speed: 50–100 mm/s | Retraction: 1mm @ 20mm/s
- Density: 1.17–1.24 g/cm³
Printing Tips
- PETG benefits from a heated bed — 75–85°C gives the best adhesion!
- Use a glue stick or hairspray on an unheated bed if needed!
- Dry at 65°C (149°F) for 6–8 hours if moisture is suspected!
- Store in a dry environment with desiccant after opening!
Specifications
- Brand: KINGROON | Material: PETG
- Diameter: 1.75mm (±0.03mm) | Air bubbles: 0%
- Filament length: ~320m per roll | Net: 1KG/roll (2.2 lb)
- Total set weight: 35.27 lb (16kg)
- Shelf life: 2 years | Packaging: Vacuum sealed with desiccant
- Origin: China | Ships from: United States
